Remote triggering with flash

Is it possible to remote trigger the camera with an attached V6II and a second V6II with a flash attached?
Or do I need 3x V6II? One V6 II for the camera, one for the flash and one as the trigger?
Thanks for your help :)

Comments

  • edited October 2016 PM
    Mehrdad said:


    Or do I need 3x V6II? One V6 II for the camera, one for the flash and one as the trigger?


    Yes you do need 3, and also need to use Relay Mode.

    http://www.cactus-image.com/community/discussion/comment/2034/#Comment_2034

    You can read more about Relay mode on p63 of the V6 II user manual:
    http://www.cactus-image.com/Cactus V6 II User Manual (EN).pdf

    Cheers!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) and not by X-TTL firmware versions: PEN.A.001 and OLY.A.001.  No schedule has been released yet. 

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.