Fuji XT-10 and Nikon SB900 won't fire

First time using new V5 duo - attempted to follow all instructions that came with units but unable to get fuji to fire the flash either on the V5 on camera, or the Rx V5 off-camera.  Many thanks for some advice as to what I'm obviously doing wrong.

Comments

  • Hi @akennedy28,

    Have you already set the SB900 to M (manual) mode.

    As for the V5, make sure both transceivers are set to the same channel.  You can half-press the Test button on the TX unit and see if both unit lights up.  Keep them at a distance and not right next to one another.

    Thanks!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.