Cactus V6 II - BRESSER FM-600 - Fujifilm X-T2

Hello! Help please correctly synchronize all together: studio flash BRESSER FM-600 - 3 pieces and Fujifilm X-T2. How much Cactus V6 II do I need? And how compatible the BRESSER FM-600 and Cactus V6 II.

Comments

  • Hello @RuslanARZ

    Are you looking for High-speed Sync?

    Does the FM-600 supports HSS native?  Because if it does then it may work, simply plug in one (1) V6 II to each of the FM-600 using a 3.5mm sync cord.


    If it does not supports HSS, but it has a long flash duration, 1/100s or longer at t0.1, then you would be able to sync with the flash.

    However if it does not support HSS and has a fast flash duration, then you the original Cactus V6 would already be sufficient.

    The general rule is you need one (1) transceiver per device, camera or flash.  In your case with 3 flash units and one camera, you need 4.
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • Hello, Antonio! Thank you so much. I will try

  • Hello, Antonio! Thank you so much. I will try

    OK. Keep us posted. Thanks!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.