V6 II trigger with RF60X flash on PENTAX K1 didn't fire when they are too close to each other

When I have the V6II mounted on my PENTAX K1 and I moved about 1 yard from the RF60X, the flash didn't fire.  When I move away (more than 1 yard) it worked. 

Am I missing anything in the setup?

Comments

  • Sounds like your V6 II is currently set to LONG Work Range?

    From our experience, the receiver unit can capture the signal when it is no less than 4 inches from the transmitter, in SHORT Work Range.

    You can change the work range setting under Radio setup.

    Thank you.
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • Wonderful. It worked.

    Thanks very much
  • Fantastic news, @K1_TTL_HSS.

    Let us know if you require further assistance. Cheers!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.