Profile Selection Please Help!!!

edited October 2014 in RF60 Questions
What is the correct profile to choose on the V6 transceiver when using the RF60 Flash.  There is no profile listed for it.

Comments

  • Rest assured! The RF60 has built-in wireless feature that compatible with the V6. You don't need to select profile on the V6 unit.

    FYI, to activate the remote control of the RF60, switch the RF60 in S mode and assign one of the group. On the V6 Tx unit, just select the group regard to the RF60.

    The V6 is capable to remote ZOOM control with RF60. To enable this feature, select SWAP CONTROL to ZOOM (CACTUS) in the V6 SUB-MENU.

    All the best!
    Ray Chan

    Senior Product Specialist
     
    Cactus®
    Harvest One Limited
  • Thanks, I was concerned about the profile compatibility.
  • edited October 2014 PM
    Rest assure! RF60 is fully compatible with V6.
    Ray Chan

    Senior Product Specialist
     
    Cactus®
    Harvest One Limited
  • Help please, I want to control my flash zoom.

    I don't have the SWAP CONTROL menu.

    All the other sub-menu items are there.



    Thanks!
  • Henri9009 said:

    Help please, I want to control my flash zoom.


    I don't have the SWAP CONTROL menu.

    All the other sub-menu items are there.



    Thanks!
    What firmware version are you running?

    Below is taken from Sigma's X-TTL firmware Quick Start Guide.

    a431978d4a396aa11535aae6a0d875.png

    Hope this helps.

    Cheers!
    Swap Control.PNG
    780 x 258 - 81K
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • @Henri9009
    Make sure to switch on your V6 in "TX" mode. Then you should see the SWAP CONTROL item in the SUB-MENU.
Sign In or Register to comment.