ok. so only P-TTL support is available for my pentax k-5 with only pentax supported flashes.
No, with a V6 your K-5 can trigger any flash from one of the supported systems (Canon, Nikon, Panasonic, Fuji, ...). If the flash model is supported (or can be learned by the V6), the V6 can also manually control its power level. You can even mix brands and flash systems in one setup and control them individually.
The above includes supported flashes from Pentax (P-TTL or TTL).
There is no special support for P-TTL, except for the case of a P-TTL flash mounted to an on-camera V6, that has "TTL pass-through" activated. In this case, this (and only this) on-camera flash will "speak" P-TTL with the camera.
Hello, I miss the flash profiles "Pentax camera with flash METZ 58 AF-1". For other camera manufacturers like Canon or Nikon this profile is available for Pentax cameras not. How can I solve this problem? For a solution I would be grateful.
the latest firmware update is available and I have installed.
You should be able to create your own profile for this flash.
Consult the manual for how to teach the V6 the power characteristics of your flash. Once you created a profile, you can use as if it had been predefined.
A customer have tested the Nikon SB-500 compatible by using SB-600's flash profile.
In case anyone is wondering
Thanks!
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Hi I have a Meike 430; I expect that this flash will work with the Canon 430 profile? I also have a "vintage" Vivitar 636AF which was originally used with a Minolta 7000. The flash is ttl dedicated but can only be set to 2 different levels manually. Any chance of profiling this flash or use any of the existing profiles?
Jta
Update: Tried a set of V6 with the MEIKE MK430, and it does not work; in Canon learning mode, it won't even fire the flash, but it works nicely in manual mode. Tried all profiles (in the preloaded 1.0.182 FW), some of them will fire the flash but none of them can do power control. Updated to the latest FW, but learning is still not possible. As it is an E-TTL II flash for Canon that works nicely on the camera, i guess that it would be possible for you to make predefined profile?? - hope you can put it into the pipeline.
For Canon, the 320EX profile is usually the fix as it's also a digital-only TTL unit. If that doesn't work then it would take us some time to decode the Meike, if at all possible.
Thanks for testing and shouting out!
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
The Nikon SB-400 is compatible when the SB-700 flash profile is selected.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Neewer VK750II i-TTL works using the SB-700 flash profile.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Yongnuo YN568EX for Nikon is compatible with the V6 by using Nikon SB-700's flash profile, tested by another user.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Hello, I miss the flash profiles "Olympus camera with flash METZ 50 AF-1". For other camera manufacturers like Canon or Nikon this profile is available for Olympus cameras not. Would be possible to configure manually? I do not see any hardware limitation as 50 AF-1 profile exist with Canon or Nikon. Thank you, Tomas
Hello, I miss the flash profiles "Olympus camera with flash METZ 50 AF-1". For other camera manufacturers like Canon or Nikon this profile is available for Olympus cameras not. Would be possible to configure manually? I do not see any hardware limitation as 50 AF-1 profile exist with Canon or Nikon. Thank you, Tomas
It seems METZ 50 AF-1 works well with Panasonic FL500 profile. Up to now I found out just one bug, when zoom is set auto (usually 24mm) than V6 RX change setup of zoom to 70mm. Workaround is set flash to manual zoom each time (flash do not remember zoom setting) or use 70mm "automatically". Interesting is that such a way works 2 of 3 my V6s. One of them do not setup zoom (this I use in TX mode).
Hello, I miss the flash profiles "Olympus camera with flash METZ 50 AF-1". For other camera manufacturers like Canon or Nikon this profile is available for Olympus cameras not. Would be possible to configure manually? I do not see any hardware limitation as 50 AF-1 profile exist with Canon or Nikon. Thank you, Tomas
It seems METZ 50 AF-1 works well with Panasonic FL500 profile. Up to now I found out just one bug, when zoom is set auto (usually 24mm) than V6 RX change setup of zoom to 70mm. Workaround is set flash to manual zoom each time (flash do not remember zoom setting) or use 70mm "automatically". Interesting is that such a way works 2 of 3 my V6s. One of them do not setup zoom (this I use in TX mode).
Hello, I miss the flash profiles "Olympus camera with flash METZ 50 AF-1". For other camera manufacturers like Canon or Nikon this profile is available for Olympus cameras not. Would be possible to configure manually? I do not see any hardware limitation as 50 AF-1 profile exist with Canon or Nikon. Thank you, Tomas
It seems METZ 50 AF-1 works well with Panasonic FL500 profile. Up to now I found out just one bug, when zoom is set auto (usually 24mm) than V6 RX change setup of zoom to 70mm. Workaround is set flash to manual zoom each time (flash do not remember zoom setting) or use 70mm "automatically". Interesting is that such a way works 2 of 3 my V6s. One of them do not setup zoom (this I use in TX mode).
Great news! Thanks for sharing your finding, @sedlacekt. Much appreciated!
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
User reports Pentax AF201FG works using AF360's flash profile.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
I think its a shame that the Cactus Transceivers lack support for Sigma Super Flashes...
The reason is obvious. Cactus wants to sell its own flashes... But that is not the reason why i bought Cactus Transceivers.... I bought them so I can use my Sigma 610 DG Super and my Sigma 140 Ringflash with Pentax-Hotshoes maybe on some other system and/or control all those flashes wirelessly... THX.
From spec: i-TTL Balanced Fill-Flash with CLS compatible cameras Manual Flash (with Nikon Creative Lighting System digital and 35mm SLR cameras)
Not sure if it can work with 35mm means it runs on analogue too?
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
The <LCD BACKLIGHT> can be adjusted from the Sub-Menu on the V6.
1) 5 seconds
2) 15 seconds
3) Stay On
LCD will not light up unless press buttons on that particular unit.
Thank you.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Comments
The above includes supported flashes from Pentax (P-TTL or TTL).
There is no special support for P-TTL, except for the case of a P-TTL flash mounted to an on-camera V6, that has "TTL pass-through" activated. In this case, this (and only this) on-camera flash will "speak" P-TTL with the camera.
the latest firmware update is available and I have installed.
Greetings, Marcus
Consult the manual for how to teach the V6 the power characteristics of your flash. Once you created a profile, you can use as if it had been predefined.
In case anyone is wondering
Thanks!
Brand Manager
Updated to the latest FW, but learning is still not possible.
As it is an E-TTL II flash for Canon that works nicely on the camera, i guess that it would be possible for you to make predefined profile?? - hope you can put it into the pipeline.
For Canon, the 320EX profile is usually the fix as it's also a digital-only TTL unit. If that doesn't work then it would take us some time to decode the Meike, if at all possible.
Thanks for testing and shouting out!
Brand Manager
The Nikon SB-400 is compatible when the SB-700 flash profile is selected.
Brand Manager
Neewer VK750II i-TTL works using the SB-700 flash profile.
Brand Manager
A fellow V6 user tested the Yongnuo YN600EX-RT works using YN568EX-II's flash profile.
Brand Manager
Brand Manager
Much appreciated!
Brand Manager
Brand Manager
This?
http://www.nikonusa.com/en/nikon-products/product/flashes/sb-r200-wireless-speedlight.html#tab-ProductDetail-ProductTabs-TechSpecs
If it supports analogue TTL then yes.
From spec:
i-TTL Balanced Fill-Flash with CLS compatible cameras
Manual Flash (with Nikon Creative Lighting System digital and 35mm SLR cameras)
Not sure if it can work with 35mm means it runs on analogue too?
Brand Manager
Brand Manager