Learning manual flash - Yongnuo 560 iii

Hi,
I purchased Cactus v6 transceivers and I already have Yongnuo 560 iii and 468 flashes. But they are not work with V6. They are manual flashes. How do I make it work? Please help. Thanks.

Comments

  • Hello @arunvenuav,

    Only TTL system flashes can be learned.
    Manual flashes such as the YN560III cannot be learned.
    For manual flashes, you will have to adjust power manually on the flash unit and not wirelessly.

    Please refer to flashes listed below - if you have TTL flash model that is not listed below but runs on one of the system below (Canon, Nikon, Olympus, Panasonic and Pentax) and it offers analogue TTL then you would have a chance of learning it's profile.

    Flash model profiles pre-installed in V6:
    Canon system models:

    - Cactus AF45C, AF50C;

    - Canon 320EX, 420EX, 430EX, 430EXII, 430EZ, 540EZ, 580EX, 580EXII, 600EX-RT;

    - Godox V860C;

    - Metz 36AF-5, 44AF-1, 50AF-1, 52AF-1, 58AF-1, 58AF-2;

    - Nissin Di866 MARK II, MG8000;

    - Phottix Mitros, Mitros Plus;

    - Sigma EF-500 DG SUPER;

    - Yongnuo YN568EX II;

    Nikon system models:

    - Cactus AF45N, AF50N;

    - Godox V860N;

    - Metz 36AF-5, 44AF-1, 50AF-1, 58AF-2;

    - Nikon SB-24, SB-28, SB-600, SB-700, SB-800, SB-900, SB-910;

    - Nissin Di700, Di866;

    - Sigma EF-530 DG SUPER;

    Pentax system models:

    - Cactus AF45P, AF50P;

    - Metz 36AF-5, 44AF-1, 50AF-1, 58AF-2;

    - Pentax AF 360FGZ, AF 540FGZ;

    Olympus system models:

    - Metz 44AF-1, 52AF-1, 58AF-2;

    - Olympus FL-36R, FL-50R;

    Panasonic system models:

    - Panasonic FL360, FL500;

    Thank you!
    Antonio Lao
    Brand Manager
Sign In or Register to comment.