D600+SB28 TTL "translate"

Hi all, 

As you can know D600 and SB-28 are not compatible with TTL. 

So my question is to know if i put a V6 beetween my D600 and SB-28, the TTL will be "translate" and works on my flash?? Hope you understanding what i mean.

Thank's a lot and have a nice day.

Comments

  • Hello @Notrac

    You might have misunderstood the V6 system - there are no actual TTL metering from the camera that would "translate" (wirelessly transmit TTL signals) to the flash (SB-28 in your case).

    As long as the flash model is listed as compatible with the V6, if you are only using an off-camera flash setup your camera model is irrelevant. In other words you can use a Sony A7 or a Fujifilm XT-1 and still be able to wirelessly control your SB-28 speedlight.  For off-camera applications, the actual power control is between the V6 transceivers, and not between the camera and flash.

    Despite it has the ability to remotely control power outputs of TTL flash models, the V6 is still a set of manual flash triggers.

    For flash model compatibility please refer to the product page or to these lists which are upated as well: Hope this helps!

    Thank you.

    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • Hi @antonio

    Thank's for answer, i know that's V6 don't transmit TTL signal wirelessly.

    Maybe my question was not so clear, english is not my native langage.

    I was asking about TTL pass-trough feature when using V6 and flash on camera hotshoe. So i asking me if i put V6 between SB-28 and D600 on hotshoe (not wirelessly) i'll be able to use SB-28 TTL with D600?

    Thank you.


  • Oh, TTL Pass Through!  YES, is the answer.

    Press and Hold the MENU button (of the V6 in TX mode) and you will see a message on the LCD pops up: TTL PASS THROUGH

    Then, on the main screen, you will also see "TTL" icon below the battery symbol.

    Next, press the MENU button once, scroll left 3 times, go into CHOOSE PROFILE, select Nikon and the flash you are using (Nikon SB-28). Hit OK and you are ready to shoot.

    Thanks!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • Ok thx, 

    But TTL work or not with this combo?

    Because SB-28's TTL is not supported natively with D600.

    That's why i was talking about TTL "signal translation", and if i'll be able to use sb-28's TTL, instead of  using it with manual settings, when combining with a V6 and a D600.

    Have a nice day.

    Best regards, Benoit.


  • If the SB-28 does not work on the D600 directly, the V6 will not be able to fix that problem. It does not do any kind of translation.
Sign In or Register to comment.