Will the V6 II work with the Godox AD360 for Nikon with the fujifilm X-T1 ?

Hello gentlemen,

I own 2 Nikon bodies (D600 and D90) and one Fuji Body the X-T1

I feel like to have the best of both worlds Nikon and Fuji

I was wondering if the Cactus V6 II will work with the GODOX AD360 II  for Nikon and the fuji X-T1 ?

Many thanks for your response

Comments

  • We have only tested the Canon version, AD360IIC and it worked. So we are not sure about the Nikon version.

    I wonder if others have tried it?
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) but not by X-TTL firmware versions:  PEN.A.001 NIK.A.001 OLY.A.001.  No schedule has been released yet for an "A" version firmware on the V6 (MK1). 

    Cactus RF60X / RF60 Firmware versions A04 and A03 currently ONLY works with PEN.A.001 NIK.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • Dear antonio can you tell me how the set up ? Does it work with ad360 mark 1?
  • Dear antonio can you tell me how the set up ? Does it work with ad360 mark 1 for canon?
  • AD360 Mark 1 does not support HSS so it won't work with the Cactus V6 II, if doing high-speed sync is what you are after.
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) but not by X-TTL firmware versions:  PEN.A.001 NIK.A.001 OLY.A.001.  No schedule has been released yet for an "A" version firmware on the V6 (MK1). 

    Cactus RF60X / RF60 Firmware versions A04 and A03 currently ONLY works with PEN.A.001 NIK.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • AD360 Mark 1 does not support HSS ...
    One can activate HSS manually on an AD360 MK I. So while remote power control won't be possible with a V6II, HSS triggering should be fine.
  • AD360 Mark 1 does not support HSS ...
    One can activate HSS manually on an AD360 MK I. So while remote power control won't be possible with a V6II, HSS triggering should be fine.
    so if i put the ad360 mk 1 physically to hss mode, that's all that is needed for hss to work? cuz i know the cheap triggers that came with the ad360 does not seem to get hss so i thought some other info needed to get passed to the flash
  • There is no need to get any additional info to the flash, but the trigger timing has to be right.

    The V6II provides that timing and I'm sure if you search a bit, you'll find others confirming that they got the V6II to work with the AD360 Mk I.
  • AD360 Mark 1 does not support HSS ...
    One can activate HSS manually on an AD360 MK I. So while remote power control won't be possible with a V6II, HSS triggering should be fine.
    Oh it does!?

    I thought it's only on AD360 Mark II where there's a non-TTL version that still offers HSS option.

    @dale0610, maybe you can try confirming this with Godox.
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) but not by X-TTL firmware versions:  PEN.A.001 NIK.A.001 OLY.A.001.  No schedule has been released yet for an "A" version firmware on the V6 (MK1). 

    Cactus RF60X / RF60 Firmware versions A04 and A03 currently ONLY works with PEN.A.001 NIK.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • ok thx class A and antonio. will have to try it out more when i get a chance.
Sign In or Register to comment.