LV5 problems with samsung camera

Hello!I have a problems with samsung nx 1000 camera and lv5 laser trigger. As a remote i use yongnuo 603 connected via 3,5 jack of lv5 to pc sync of yn 603 and on camera i use 603 connected via 2,5 jack to micro usb of the camera port.
At first, i thoght that 603 is the veak link ,but when i used it as a remote it works.I think that signal from lv5 doesn't transfer wirelessly to camera.What do  i need to do?

Comments

  • edited June 2015 PM
    The RF603 cannot be used as an off-camera trigger unless it is modified, as it does not switch to TX mode unless it senses a camera.

    When you test fire the RF603 connected to the LV5 in your setup, the camera will not take a photo.

    An easy solution for your problem would be to get one Cactus V5 and connect it to the camera with a shutter release cable. The LV5 can trigger a V5 wirelessly.
  • Ok! What cable do i need to connect the v5 to camera ? V5 has a 3.5 jack and camera has micro usb .And one last question how i can trigger strobes  using 603 and v5 mounted on a hot-shoe of the camera
  • @gera  Sorry at the moment we don't have such a cable, however you may find them from other manufactueres. We will also try to source the right cable in the meantime.

    LV5 > V5 (RX) > shutter cable > camera shutter jack
    Camera hot shoe > 603 Transmitter > 603 Receiver > flash mounted on hot shoe / sync port

    Hope this helps!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) and not by X-TTL firmware versions: PEN.A.001 and OLY.A.001.  No schedule has been released yet. 

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.