Triggering RF60 Multi Mode from V6

I'm considering purchasing a V6 and (4) RF60s for my Fuji X-T1. Is it possible to use the V6 to trigger the RF60s in Multi mode? I don't see any mention in the V6 manual. I do see mention in the RF60 manual but it is accomplished with one RF60 as a master. In my scenario, the four RF60s are slaves in one or more groups.


  • Hello @Tim_L

    Yes, after enabling Multi mode on RF60 unit(s), you can remotely trigger them in multi flash mode from a V6. This will work in one or multiple groups.

    FYI you may at the same time adjust both power and zoom of the RF60 unit(s).

    Thanks and let us know if you have any other questions.
    Antonio Lao
    Brand Manager

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at  At Cactus, we listen. 
  • Thanks, Antonio!
Sign In or Register to comment.