Triggering RF60 Multi Mode from V6

I'm considering purchasing a V6 and (4) RF60s for my Fuji X-T1. Is it possible to use the V6 to trigger the RF60s in Multi mode? I don't see any mention in the V6 manual. I do see mention in the RF60 manual but it is accomplished with one RF60 as a master. In my scenario, the four RF60s are slaves in one or more groups.


  • Hello @Tim_L

    Yes, after enabling Multi mode on RF60 unit(s), you can remotely trigger them in multi flash mode from a V6. This will work in one or multiple groups.

    FYI you may at the same time adjust both power and zoom of the RF60 unit(s).

    Thanks and let us know if you have any other questions.
    Antonio Lao
    Brand Manager

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) and not by X-TTL firmware versions: PEN.A.001 and OLY.A.001.  No schedule has been released yet. 

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at  At Cactus, we listen. 
  • Thanks, Antonio!
Sign In or Register to comment.