Comapatibility cactus and Olympus em-1

Hi Guys, I have a Olympus em-1, and a jinbei hd600v on the way to me, I am looking for a compatabile trigger system to fire the Jinbei hss up to 1/8000, it does come with a trigger how ever it does not do hss, this would be using it in fully manual also.
 Many thanks for any info.

Alan

Comments

  • Hello Alan,

    Natively it is not possible.

    But check out this trick, also done on an OM-D E-M5. You will need to mount an Olympus TTL flash on V6 TX's hot shoe.
    https://www.youtube.com/watch?v=2AeRr1UNWz8

    It may also work with your Jinbei strobe setup.

    Thank you and keep us posted!


    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) but not by X-TTL firmware versions:  PEN.A.001 NIK.A.001 OLY.A.001.  No schedule has been released yet for an "A" version firmware on the V6 (MK1). 

    Cactus RF60X / RF60 Firmware versions A04 and A03 currently ONLY works with PEN.A.001 NIK.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • But check out this trick, also done on an OM-D E-M5. You will need to mount an Olympus TTL flash on V6 TX's hot shoe.
    https://www.youtube.com/watch?v=2AeRr1UNWz8
    With the upcoming V6 Mk II in a few months, will the setup be identical except you wouldn't need to mount the Olympus TTL flash on the V6 TX hot shoe? 

    i.e. Camera with V6 (Mark II) mounted in TX mode --> HSS signal --> V6 (Mark II) in RX mode with HSS capable flash mounted
  • @japadog, in a nutshell, yes. ;)
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) but not by X-TTL firmware versions:  PEN.A.001 NIK.A.001 OLY.A.001.  No schedule has been released yet for an "A" version firmware on the V6 (MK1). 

    Cactus RF60X / RF60 Firmware versions A04 and A03 currently ONLY works with PEN.A.001 NIK.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • @japadog, in a nutshell, yes. ;)
    Looking forward to it then! 
Sign In or Register to comment.