Trigger PhotoFlex Strobe 650 - uses 1/4" phone jack

Is there a method to plug in some cable adapter that will plug in to a PhotoFlex Strobe 659 that has a 1/4" phone jack receiver and have it trigger the flash remotely - AND - if possible control the intensity output ?

Comments

  • You won't be able to control the strobe intensity, but if you connect the V6 receiver with the strobe with a respective cable then you will be able to trigger the strobe with a V6 remotely.
  • Is Cactus working on making the PhotoFlex Strobe 659 interfaced with the Cactus V6 so intensity can be controlled wirelessly remotely?
  • Strobes generally don't have an input that allows third-party control of the power output, so the answer is an almost certain no.
  • Hi Bob,
    Is Cactus working on making the PhotoFlex Strobe 659 interfaced with the Cactus V6 so intensity can be controlled wirelessly remotely?
    No, we are not working on one.

    Thanks!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.