"Group Sequence" mode not fully functional with RF60
Hello
I use 2 V6 (FW 0.175) and 2 RF60 (latest FW).
When switching the V6 to "Group Sequence" (ether A-B-C-D or AB-CD) the 2nd V6 releases the flash as expected, bit the RF60 do nopt responde at all.
Switching "Group Sequence" back to "OFF" all flashes are working in same setup.
I use 2 V6 (FW 0.175) and 2 RF60 (latest FW).
When switching the V6 to "Group Sequence" (ether A-B-C-D or AB-CD) the 2nd V6 releases the flash as expected, bit the RF60 do nopt responde at all.
Switching "Group Sequence" back to "OFF" all flashes are working in same setup.
Comments
I've reported this problem earlier.
As you can see from the reply by Cactus, the RF60 needs an update to work with the group cycling feature.