V6, Metz 48 and K1

Hi, since I updated the firmware on my my Metz 48, to have it working with my Pentax K1, the V6 stopped controlling the power levels of the Metz, it still fires, but no remote power control

Comments

  • Hello @NunoAlmeida

    Thanks for reporting the problem. I will forward it to our R&D team.

    Your understanding during this time is much appreciated.
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • edited August 2016
    @NunoAlmeida we updated our Metz flashes for Pentax, 44AF-1, 50AF-1, and 58AF-2, but only the 50 AF-1 does not work after the update.

    I suspect Metz 50 is the replacement model for Metz 48 so that's why both
    does not work after the K-1 update. You will have to contact Metz for
    confirmation.  But the technical reason is because Metz have taken out Analogue TTL, which is what the V6 based on to function.

    On the other hand, both 44 AF-1 and 58 AF-2 works with no problems at all. Power can be controlled remotely via the V6.

    FYI, Metz 50 with K-1 update works with the new V6 II. ;)

    Thank you.

    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • Thank you, although I still have the problem, I am very happy with the way you are conducting the issue.


    FYI, Metz 50 with K-1 update works with the new V6 II. ;)

    Thank you.

    On the other hand the 58 also work fine with V6... ;)
    Joke aside, true and I am considering it, but would really love to have ALL my gear working.
    Again thank you, best regards
  • No problem, we have to find out too. So it is good news that not all of them are affected. Perhaps you can consider selling your Metz 48 for another Metz, or maybe just getting a dedicated unit for off-camera flash, such as the RF60.

    Please don't hesitate to let us know if you have other questions.

    Thank you!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.