Sony and Fuji

Hello I work with both Sony (Alpha 7IIR) and Fuji (X-Series) systems. I will soon buy some flashes 3 or 4 of yours RF60. Can you please tell me if I buy your advanced kit C for Sony I only have to buy another transceiver to use with Fuji, right?
Or I have to buy transceivers for all the flashes?
One more question, do you send your products to Portugal, or do you have a representation here?

Thanks

Comments

  • Hello @RaulTME

    The Advanced kit C for Sony only has one V6 IIs Transceiver. For your Fujifilm camera you need to buy one V6 II.

    Cactus RF60 is a wireless flash so you do not need any external wireless trigger device for it.

    We ship to Portugal but we also have a distributor there. Please contact: http://www.robisa.es/pt
    They will have stock late-August, soon after their summer holiday.

    Thank you!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) and not by X-TTL firmware versions: PEN.A.001 and OLY.A.001.  No schedule has been released yet. 

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • can the RF60x be used on-camera in ttl mode with a fuji xe2s or a xt1?
  • edited January 2017 PM
    NachoMan said:

    can the RF60x be used on-camera in ttl mode with a fuji xe2s or a xt1?

    The RF60X does not support TTL.
    It only supports HSS off-camera. There's no TTL on nor off camera.

    Off-camera HSS works when RF60X is triggerd by a V6 II or V6 IIs. So it will work with most Fujifilm cameras, such as X-T1.

    We have not tested the X-E2S., but X-E2 did not work so it is highly possible that the X-E2s also does not work. FYI we have stated this information on the product page, under Notes on Compatibility:

    Camera(s) tested that does not support high-speed sync modes on the Cactus V6 II:

    - Fujifilm X-E2 (Updated: July 18, 2016)     
    - Fujifilm X100T (Updated: September 7, 2016)

    Thank you.

    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) and not by X-TTL firmware versions: PEN.A.001 and OLY.A.001.  No schedule has been released yet. 

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.