對於奧林巴斯 e-m1

GN02357142 · September 2016

安東尼奧你好我前幾天有問你對於Ø家的使用方式照你的方式我的問題大概都已經排除了

但是現在有一個問題我有一個疑問在手動控制情形下我閃燈是要開啟TTL模式在引閃器上控制強弱度

還是閃光燈要開到中號模式才可以調整閃光燈的強弱度？這個是我的疑惑~~

還有是否有V6II有沒有電子檔的說明書因為貴公司的說明書字體太小我看不是很清楚~~

RF-60在奧林巴斯E-M1是否有支援TTL機身上面以及引閃上面是否也支援TTL在說明書上也沒提到過

不好意思問題比較多

以及在更新上面是要怎樣更新??
祝您順心

https://c8.staticflickr.com/4/3868/15067179175_5ffd927922_h.jpg
希望有更好的燈拍出更好的創作攝影~~

Antonio · September 2016

安在手動控制情形下我閃燈是要開啟TTL模式在引閃器上控制強弱度

Yes, always set the flash unit to TTL mode when mounted on V6 II RX.
To use auto-detect function, switch on the flash first, then switch on V6 II to RX mode.

還有是否有V6II有沒有電子檔的說明書因為貴公司的說明書字體太小我看不是很清楚~~

Please visit: http://www.cactus-image.com/downloads.html

RF-60在奧林巴斯E-M1是否有支援TTL機身上面以及引閃上面是否也支援TTL在說明書上也沒提到過

RF60 is a manual flash, it does not support any TTL system when mounted directly on camera hot shoe.

https://c8.staticflickr.com/4/3868/15067179175_5ffd927922_h.jpg
希望有更好的燈拍出更好的創作攝影~~

Nice! Keep it up!

Thank you and please let us know if you need further assistance.

GN02357142 · September 2016

I am now wondering when the lead flashing is manually controlled flash because I was using original flash FL-50R

I want to change how the original flash control is to be changed to TTL mode or M mode will correspond to the output quality of Flash Trigger

Again if there is the electronic version Traditional Chinese interface Because the original Chinese statement comes little less clear to see

FP TTL can also control the use of high-speed lead flashing flash output value of it?

Antonio · September 2016

I am now wondering when the lead flashing is manually controlled flash because I was using original flash FL-50R

I want to change how the original flash control is to be changed to TTL mode or M mode will correspond to the output quality of Flash Trigger

If you manually control the on-camera flash, it does not matter if it belongs to the same system or not, just choose the corect flash profile or let the V6 II auto-detect the system and it will apply an AUTO flash profile.

To control the flash power output, hold the MENU button and scroll the Adjustment Dial at the same time. This action changes the on-camera flash power.

If you want to use TTL for on-camera flash, then it must be the same system as camera, such as your FL-50R, turn on TTL Pass Through on the V6 II by long-pressing MENU button for 3 seconds.

Again if there is the electronic version Traditional Chinese interface Because the original Chinese statement comes little less clear to see

You mean on the LCD of V6 II?
Which statement(s) are you referring to? See if we can clarify for you.

FP TTL can also control the use of high-speed lead flashing flash output value of it?

Yes, you can still adjust the power output when using Normal HSS. However just like how the flash would behave when mounted directly on the camera, the maximum power will be different than under x-sync speeds, due to the long flash pulsing nature of the flash in HSS.

Thank you.

GN02357142 · September 2016

Hello Antonio
I have tested V6II really good only fly in the ointment in manual mode with the control system can not only use ~~ label output in this case TTL no more convenient if I want to use more light on
In the case of a single lamp can be used for good
Currently on C N in the two brands from the flash used in the manual of the bottom have a way to control the distance
O family also hope that one day it can be so for some creative work on will be more perfect

Sincerely wish you

對於奧林巴斯 e-m1

Comments