V6II TTL pass-through mode Olympus FL-600R flash one time exactly after setup
I was able to manually set the TTL pass-through mode on the V6II with my Olympus FL-600R flash, connected to Olympus OMD10m2. It was not able to be detected automatically for a modern flash also concerns me ...
However, the bigger problem is I can only take "exactly" one picture triggering the FL-600R via TTL pass-through mode . Every sequential shot, it doesn't fire the TTL pass-through flash. If I turn off V6II and on to try again, it will also repeat the process of only firing the flash exactly once only. I have a RF60 on group A, and it first together at the first time too.
Is this a known issue and how to correct it?