If the Godox QS400 does not has a HSS mode but is able to sync above your camera's x-sync, that means it has a long-enough flash duration. Have fun!
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
but it need cactus and force hss to do that . with out cactus can't do above 1/200
That's what you need the V6 II for!
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
test more with AD600+XT16+CACTUSV6II+XT1 use built in AD600 trigger, HSS not work .
but AD600+XT16+CACTUSV6II+XT1 and Usb XTR16 receivers, HSS work!!!
but with use xtr16 as receivers,I can't adjust the power but built in AD600 as receivers can adjust power.
I set group to "a" both xtr16 and but built in AD600, set channel XTR16 to "1" and set channel but built in AD600 receivers to "2" and switch between "1" and "2" for shoot and adjust the power!
but AD600+XT16+CACTUSV6II+XT1 and Usb XTR16 receivers, HSS work!!!
Sounds like a comlicated setup.
Would this work for your strobe?
...but with use xtr16 as receivers,I can't adjust the power but built in AD600 as receivers can adjust power.
How about just strapping the XTR16 to a neck strap so it's hardy to adjust power when you need to, without actually connecting it to the camera / strobes, so you can let the V6 II do its thing.
One thing I want to mention is the V6 II was not designed to be used in conjunction with other flash trigger, like how you set it up above.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
... your guys done a good job. thank for your work. I will help you promoting here in thailand.
basz
Woo! That would be fantastic! Thanks so much @basz!
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Comments
Brand Manager
Brand Manager
Would this work for your strobe?
How about just strapping the XTR16 to a neck strap so it's hardy to adjust power when you need to, without actually connecting it to the camera / strobes, so you can let the V6 II do its thing.
One thing I want to mention is the V6 II was not designed to be used in conjunction with other flash trigger, like how you set it up above.
Brand Manager
and I think it only work with 1 pin trigger.
what ever, your guys done a good job. thank for your work. I will help you promoting here in thailand.
basz
Thanks so much @basz!
Brand Manager