FLASH RF60 does not respond to changes in light setting on Cactus V6II

Hi, I use Nikon D800, Cactus V6 II and RF 60. I note that when I modify the exposure of the remote flash changing light settings in Cactus V6 II, the settings on the flash occasionally most of the times do not get automatically adjusted. What am I doing wrong?

Comments

  • Hi @Olivio55,

    What was the distance between the camera (V6 II in TX mode) and the flash (RF60 in Slave mode)?

    If you are shooting in confined spaces (10 cm ~ 3 meters), set the V6 II to SHORT RANGE, under Radio Setup.

    Also, make sure your V6 II and RF60 are using the latest firmware version.

    Thank you.
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.