I just updated my X-T1 to firmware 5.0 and Cactus V6 ii to firmware 1.1.005. Trigger Cactus V6 ii and flash Cactus RF60 are no longer sync. Does anyone else have the same problem?
I just updated my X-T1 to firmware 5.0 and Cactus V6 ii to firmware 1.1.005. Trigger Cactus V6 ii and flash Cactus RF60 are no longer sync. Does anyone else have the same problem?
try learn hss with other speed like 2000 ss it work on my x10
UPDATE: After removing the metal plate on X-T1 and set "Work Range" = SHORT on V6 ii, I am now able to do HSS on X-T1 FW 5.0 and V6 ii FW 1.1.005.. But my Nikon D3 can no longer do HSS
I have the same problem with late flash sync 1 sec behind shutter with V6II and RF60 have not found a solution on my X-T10. My D800 will no HSS with V6II and RF60 either.
I have the same problem with late flash sync 1 sec behind shutter with V6II and RF60 have not found a solution on my X-T10. My D800 will no HSS with V6II and RF60 either.
... V6 ii FW 1.1.005.. But my Nikon D3 can no longer do HSS
This is weird! We do not have a D3 to test in the studio. Anybody else shooting on a Nikon D3? . . .
I have the same problem with late flash sync 1 sec behind shutter with V6II and RF60 have not found a solution on my X-T10. My D800 will no HSS with V6II and RF60 either.
Did you try re-LEARN HSS again? Or Factory reset then redo, auto-detect > Fujifilm, LEARN HSS, and turn on Forced HSS?
As for your D800, another photographer we know uses the D800E and no problem getting HSS to work on 1.1.005 on his V6 II. Are you able to repeat this on other V6 II? . . .
I have the same problem with late flash sync 1 sec behind shutter with V6II and RF60 have not found a solution on my X-T10. My D800 will no HSS with V6II and RF60 either.
on xt10 I learn hss with 1/2000 it work, i think.
Hi @basz, if you could confirm HSS working on your X-T10 on V6 II running 1.1.005 that would be great.
Thank you all.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Intersting findings, @basz. Technically it should be the same, either oyu learn at 1/1000s or 1/2000s.
But then every camera behaves drastically different. So maybe X-T10 users should do LEARN HSS at 1/2000s or above.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
I was just wondering if it's possible for the next FW update when V6 ii (TX) mounted and detected Fuji camera then Force HSS will be automatically be at "ON"?
Hey @shutterbug, I just replied on the other thread.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".
Comments
Anybody else shooting on a Nikon D3?
.
.
. Did you try re-LEARN HSS again?
Or Factory reset then redo, auto-detect > Fujifilm, LEARN HSS, and turn on Forced HSS?
As for your D800, another photographer we know uses the D800E and no problem getting HSS to work on 1.1.005 on his V6 II. Are you able to repeat this on other V6 II?
.
.
. Hi @basz, if you could confirm HSS working on your X-T10 on V6 II running 1.1.005 that would be great.
Thank you all.
Brand Manager
Technically it should be the same, either oyu learn at 1/1000s or 1/2000s.
But then every camera behaves drastically different. So maybe X-T10 users should do LEARN HSS at 1/2000s or above.
Brand Manager
Brand Manager