If your FlashPoint Streaklight 360 (aka Godox AD360) is either a Canon or NIkon version, then it's a yes. You can mount the flash directly on the V6 II's top hot shoe, and it will even auto-detect the flash as either Canon or Nikon and apply an AUTO flash profile.
As for the Rovelight 600 (aka Jinbei HD600), it is also compatible as its flash duration is longer than 1/100s at t0.1. Simply connect the V6 II (Receiver unit) to the Rovelight via a 3.5mm sync cable.
Here's the setup for your reference:
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".
TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.
Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com. At Cactus, we listen.
Hi Antonio, will this also work with Panasonic GH4?
We can't be sure as we don't have the exact setup.
The user who had GH4 work up to 1/8,000s was using a Metz flash, not a Godox. But likely a yes since it's timing between two V6 II.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".
TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.
Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com. At Cactus, we listen.
Will this work with the Pixapro hybrid 360 TTL (godox ad360 TTL version) in the same way?
Thanks
Should be if you are sure it is the same Godox unit as the AD360 and that you are able to activate its HSS function, i.e. You see a HSS logo on the flash's LCD.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".
TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.
Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com. At Cactus, we listen.
Comments
If your FlashPoint Streaklight 360 (aka Godox AD360) is either a Canon or NIkon version, then it's a yes. You can mount the flash directly on the V6 II's top hot shoe, and it will even auto-detect the flash as either Canon or Nikon and apply an AUTO flash profile.
As for the Rovelight 600 (aka Jinbei HD600), it is also compatible as its flash duration is longer than 1/100s at t0.1. Simply connect the V6 II (Receiver unit) to the Rovelight via a 3.5mm sync cable.
Here's the setup for your reference:
Brand Manager
The user who had GH4 work up to 1/8,000s was using a Metz flash, not a Godox. But likely a yes since it's timing between two V6 II.
Brand Manager
Should be if you are sure it is the same Godox unit as the AD360 and that you are able to activate its HSS function, i.e. You see a HSS logo on the flash's LCD.
Brand Manager
Senior Product Specialist
Cactus®
Harvest One Limited