... Still waiting for cactus to have an update to enable AD600 profile....
Hi Nicolee, I bought a godox AD600 with X1N. With the X1N ontop of the V6II, it will not fire.
I had to put a sync cable on it. Will not go into HSS, if you do there will be banding. But max sync speed can be achieved.
Here's my setup when testing for @choongdcPentax K-3 Mark II, V6 II units all running on 1.1.005Godox AD600 in M mode, HSS turned on, V6 II (RX) connected via sync cable, MANUAL flash auto-detected.Note: I did not even include Godox's own transmitter for setting HSS up.And here's an image from the test, at 1/8000s F8.0.Shoot any questions you may have.
Will it work with X1c/n on top of cactus ?Im using Fuji XT1 and X-Pro2
hey guys, i dont want to open a new topic for this. i need to know if the cactus v6 ii is working with the godox ad600 bm and godox 360 mark 1. special about this two strobes is, that they have no TTL but HSS. so i´ve heard that cactus comunicates over TTL, but this two strobes not have TTL. so will this be working or not?
thanx for your fast reply! yes i saw your picture, but as a newbie i thought any flash must have ttl on board to work with the cactus and the ad600 has one modell with ttl and one without. i want to buy the modell without, because it is cheaper. so if you say the modell without ttl is working fine with hss and the fuji x-t2, i will buy 2 cactus v6 and a sync cable and hopefully will be happy with that.
...for the ad360: if i want work with one ad600bm and two ad360 at the same time, do i need 4 cactus v6 ii or only 2 for the ad600? maybe i can use the normal godox transmitter mounted on the cactus to controll at least the two ad360?