turning dial increases power to one group and decreases in another!!

Here is a quote from the manual.

"13.1.3 Quick Power Adjustment Mode

By turning the dial left or right one “click”, the power level of the chosen groups will increase or decrease by one step. The EV step in the V6 II factory setting is 1/3 EV. The EV step can be conf igured to 1/2, 1/3, or 1/10 in the <EV STEP> menu (see Section 13.3)."

This is incorrect. My Tx increase one group and decrease the power on the second group!!!


  • narrowed the issue to group "C". 
    Turned off then of then the Rx and the issue corrected itself.....
  • edited December 2016 PM
    Thanks for reproting the issue, @dougbolton.

    It's the first time we have heard of such a bug. But I am glad the issue is fixed after a power cycle. 

    Please let us know if the problem perssists.


    Antonio Lao
    Brand Manager

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) and not by X-TTL firmware versions: PEN.A.001 and OLY.A.001.  No schedule has been released yet. 

    Cactus RF60X / RF60 Firmware versions A01 and A02 currently ONLY works with PEN.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Cactus RF60 is now an off-camera TTL flash with firmware version 205 or later!

    Metz M400 (for Fujifilm) is now supported on the Cactus V6 II (HSS and TTL).

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.