Godox AD360

edited December 2016 in V6 II Compatibility
Is the Godox AD360 mk1 version compatible with the V6Ii? It has HSS capability but no ttl. Or would I need the mark 2 ttl version? Will the Cactus recognise it automatically even though it's not a preinstalled profile?


  • If you can activate HSS directly on the flash model, you can use it as a manual flash and it would still fire the long pulsing, then you are good to go. Just connect the V6 II directly on hot shoe - it should detect it as a manual flash.

    HOWEVER you may need Godox's own trigger to activate HSS.

    We better wait and if anyone here has this model to verify.
    Antonio Lao
    Brand Manager

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "FUJ.1.002", "NIK.A.001", "v.103".

    For the time being, Cactus V6 (MK1) running on firmware version 2.1.001 can be triggered by a V6 II (MK2) running on Multi-brand HSS firmware (e.g. 1.1.013) but not by X-TTL firmware versions:  PEN.A.001 NIK.A.001 OLY.A.001.  No schedule has been released yet for an "A" version firmware on the V6 (MK1). 

    Cactus RF60X / RF60 Firmware versions A04 and A03 currently ONLY works with PEN.A.001 NIK.A.001 and OLY.A.001.  Other "A" version of X-TTL firmware will be released soon. For both Multi-brand HSS and X-TTL firmware versions (FUJ, SIG, SON), install firmware version 103 / 205 on your RF60X / RF60.

    Nikon D750 users please read this thread: 

    Fujifilm EF-X500 users please read this thread:

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • You can accomplish HSS with a Godox AD360 flash using a combination Cactus V6ii and Godox The Cactus V6ii mounted directly mounted to the camera. The Godox trigger is mounted in the Cactus V6ii hot shoe.

    The Cactus V6ii  unit allows
    you to set both the Camera System and Flash System that you are going
    to use. However, only the Nikon Flash System setting in the V6ii pass
    the signal to the Godox X-16 trigger correctly. If set to the Pentax
    Flash System it will not fire the Godox 360. If you set the Flash
    System to Canon it fires the flash late and will not sync with the
    camera. The Power of flash is controlled by the Godox X-16 trigger mounted on the V6ii
  • I can agree to the above.  Works fine on XT2 with latest firmware updates

    If you move the cactus v6ii and Godox combo to another XT2 you ned to get the Cactus & Fuji to re-lear HSS.
Sign In or Register to comment.