New Cactus user. Fuji Cameras will not fire Flash, but Nikon camera will.
I have updated my V6 II to the latest software and believe I understand how to set up the groups and channels. My Nikon SB-910 fires when the Cactus Tx and Rx units are used with my Nikon D810. I bought these for use with my Fuji XT-2 and X-Pro2 cameras. TX unit seems to recognize a Fuji Camera, and RX unit seems to recognize the the SB-910 flash. I can hit the test fire button on the front of the camera and the flash fires. I also see the green light on the RX unit when I press the shutter button, but it doesn't fire. The TX unit seems to control the power and zoom of the flash. The flash is set in TTL Mode.
One thing I do not see is an N in the display of the TX unit for the Nikon flash. I have removed the spring from the X-T2 to make sure I have good contact with the trigger. I have made sure I don't have my camera on continuous mode, electronic shutter or silent mode and it will fire my flash when connected directly to the hotshoe. However, when I hold down the menu button to engage the TTL passthrough with the Nissin i40a mounted on the TX unit on top of the camera, it does not fire.
I am out of ideas. What am I missing? If I can't get this going quickly, I may have to move in another direction. Thanks.